EUTECH INSTRUMENTS ALPHA COND 500 - REV 4 Specifications download pdf (Page 29)

Transmitter Cond/Res 2-Channel M300 29

Printed in Switzerland 52 121 318

8.2.1 Channel Setup

Press the [ENTER] key to select the ‘Channel Setup’ Menu.

Select Sensor Type (2- or 4-electrode) and press [ENTER].

The 4 lines of the display can now be conﬁgured with measurements. Pressing the [ENTER] key

will display the selection for lines c and d.

Pressing the [ENTER] key again will bring up the Save Changes dialog. Dual channel trans-

mitters also require selecting a channel ‘A’ or ‘B’ for each line of the display. Selecting No will

discard the entered values and return to the measurement display screen, selecting Yes will

save changes made.

8.2.2 Temperature Source

Press the [ENTER] key to select this Menu. The following options can be chosen:

‘Fixed’: allows a speciﬁc temperature value to be entered.

‘Use this channel’ (‘Use this Ch PT1000’ on dual channel transmitters): temperature input will

be taken from the sensor attached.

‘Use Other Channel’: temperature input will be taken from the sensor attached to the other

channel (dual channel transmitters only)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 63 64

No comments

EUTECH INSTRUMENTS ALPHA COND 500 - REV 4 Specifications Page 29