EUTECH INSTRUMENTS ALPHA CON 190 18 DIN CONDUCTIVITY CONTROLLERTRANSMITTER Instruction Manual download pdf (Page 5)

- 2 -

2 SAFETY INFORMATION

The Eutech Controller/Transmitter shall be installed and operated only in the

manner specified in the Instruction manual. Only skilled, trained or authorized

person should carry out installation, setup and operation of the instrument.

Before powering up the unit, make sure that power source it is connected to, is as

specified in the top label. Failure to do so may result in a permanent damage to the

unit.

The unit has live and exposed parts inside. If it has to be opened, make sure that

the power to the unit is off and disconnected.

The unit is Fuse protected. In the event the fuse has to be replaced, use only those

as specified in the manual.

The degree of protection against electric shock will be achieved only by

observance of the corresponding installation rules.

1 2 3 4 5 6 7 8 9 10 ... 38 39

No comments

EUTECH INSTRUMENTS ALPHA CON 190 18 DIN CONDUCTIVITY CONTROLLERTRANSMITTER Instruction Manual Page 5