EUTECH INSTRUMENTS DO 6 PLUS Instruction Manual Page 21
- Page / 40
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Instruction Manual COND 6+, TDS 6+, SALT 6+
-16-
4.3 Taking Measurements
1. Rinse the electrode with de-ionized or distilled water before use to remove any
impurities. Shake or air dry. To avoid contamination or sample dilution, rinse
probe with a small volume of your sample.
2. Dip the probe into the sample.
3. Allow time for the reading to stabilize. Note the reading on the display.
NOTE:
The protective probe guard must be attached during measurement.
Erroneous results will occur while the probe guard is removed.
Always immerse the probe beyond upper steel band for best results.
Use the fill line on the outside of the probe guard for reference.
4.4 Using Manual Ranging Function (COND 6+, TDS 6+)
By default your meter has auto-ranging ability and automatically selects the range in
which your readings appear.
Alternatively, to override auto-ranging you can manually select a specific range by
pressing ▲ successively for each measurement range. The five ranges are:
Conductivity
Range (CON 6+)
TDS Range (TDS 6+)
(using 0.5 TDS factor)
0 – 20.00 μS/cm 0 – 10.00 ppm
0 – 200.0 μS/cm 0 – 100.0 ppm
0 – 2000 μS/cm 0 – 1000 ppm
0 – 20.00 mS/cm 0 – 10.00 ppt
0 – 200.0 mS/cm 0 – 100 ppt
- Instruction Manual 1
- Preface 3
- Table of Contents 4
- 1. INTRODUCTION 6
- 2. GETTING STARTED 7
- 2.4 Inserting New Batteries 9
- 2.5 Battery Replacement 10
- 2.6 Electrode Information 10
- 2.7 Connecting the Electrode 11
- 2.8 Switching the Meter On 12
- Cond 6+ 12
- Annunciator 13
- 3. CALIBRATION 14
- Measurement Mode 16
- 3.5 Manual Calibration 18
- 3.6 Temperature Calibration 19
- 4. MEASUREMENT 20
- 4.3 Taking Measurements 21
- 4.5 HOLD Function 23
- 5. ADVANCED SETUP FUNCTIONS 23
- Overview of Advanced Setup 24
- 5.5 Temperature Coefficient 26
- 7. TROUBLESHOOTING 29
- COND 6+ TDS 6+ SALT 6+ 30
- FEATURES 31
- 9. CONDUCTIVITY THEORY 32
- 10. CALIBRATION TIPS 34
- 14. WARRANTY 38
- 15. RETURN OF ITEMS 38
Related products and manuals for Measuring, testing & control EUTECH INSTRUMENTS DO 6 PLUS
Measuring, testing & control EUTECH INSTRUMENTS CYBERSCAN PH500 PHORP BENCH METER User Manual
(12 pages)
(12 pages)
Measuring, testing & control EUTECH INSTRUMENTS ALPHA COND 200 - REV 3 Instruction Manual
(40 pages)
(40 pages)
Measuring, testing & control EUTECH INSTRUMENTS WATERPROOF C401 COLORIMETER Instruction Manual
(44 pages)
(44 pages)
Panasonic CXDP880U manuály
Uživatelské manuály a uživatelské příručky pro CD přehrávače Panasonic CXDP880U.
Poskytujeme 1 manuály pdf Panasonic CXDP880U ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comments to this Manuals